<td id="rysoo"><strike id="rysoo"></strike></td>
      <table id="rysoo"></table>
      1. News

        to provide excellent products and high quality services to customers

        to provide excellent products and high quality services to customers

        Plastic pump features

        Date:2019-03-07 Author: Click:

        Applicable medium

        A liquid of any viscosity, especially one that is viscous and difficult to transport.

        Liquids of various concentrations and dry materials after separation and dehydration.

        A liquid containing solid particles, fibers, suspended matter.

        A mixture of liquid, gas, or solid.

        Sensitive liquids not subject to agitation, shear, or plunder.

        Corrosive liquid.

        The characteristics of

        Suitable for a wide range of transport all mobile media and even non-mobile materials.

        Stable flow and pressure without pulsation.

        Variable speed can change the output flow, can be used as a metering add.

        Strong suction ability, low working noise, no leakage, no temperature rise.

        The elastic stator with a special helical cavity meshes with the rotor with a large lead distance and a large tooth height, and a continuous sealing line is formed in the stator cavity to separate the suction cavity from the pressure cavity. When the rotor rotates, the cavity moves continuously in the direction of discharge, so that materials are continuously sucked and discharged.

        Plastic pump selection

        The correct selection is the key to obtain the best use effect, in order to meet the medium of different physical and chemical characteristics of the operation requirements, the procurement of engineering plastic pump, need to provide the following data: engineering plastic pump medium: name, corrosion, abrasion, viscosity, solid content, working temperature;

        Product advantage

        1. No irrigation is required.Suction up to 5m, head up to 70m, outlet pressure 6bar.

        2, the flow is spacious, through the performance is good, allowing through the maximum particle diameter of 10mm.Pumping mud, impurities, the pump wear;

        3. The head and flow can be adjusted stepless through the opening of the air valve (the air pressure is adjusted between 1-7 bar);

        4, the pump no rotating parts, no shaft seal, diaphragm and other pumping medium and pump moving parts, working medium completely separated, the medium will not be transmitted to the outside leakage.So pumping toxic, volatile or corrosive media, will not cause environmental pollution and harm personal safety;

        5, do not need electricity, in flammable, explosive places safe and reliable use;

        6, can be immersed in the medium of work;

        7, easy to use, reliable work, open and stop simply open and close the gas valve.Even if due to unexpected circumstances and a long time without medium operation or sudden shutdown of the pump will not be damaged, once overload, the pump will automatically shut down, with self-protection performance, when the load back to normal, and automatically start running;

        8, simple structure, less vulnerable parts, the pump structure is simple, installation, maintenance is convenient, the pump medium will not touch the valve, the link and other moving parts, unlike other types of pump due to rotor, piston, gear, blade and other parts of the wear and tear and gradually reduce the performance;

        9. It can transport relatively viscous liquid (the viscosity is below 10,000cm);

        10, the pump without oil lubrication, even idling, no impact on the pump, this is the biggest characteristic of the pump.

        Plastic pump is widely used in chemical, food, brewing, pharmaceutical, electroplating, papermaking, environmental protection, water treatment and other departments, conveying acid, alkali, salt and other corrosive liquids.

        Plastic pump on the choiceYingkou chemical acid pump co. LTD



        Share